Frequently asked questions

Hi, can I use another sensor tape? Maybe I can glue the sensor to the tank wall? //Ernst

I’m sorry, you have to use the 3M tape. There is an extra tape in the box. You can always order new tape from our Webshop. Never use 2-components glue.

Why does not my sensor attach to my plastic tank?

Some manufacturers use silicone in the production of tanks. Use acetone on a cloth and wash clean where the sensor is to be placed, then the silicone disappears. In addition, you must follow our instructions.

Can you use the Gobius Pro sensors for eg sugar or grain?

Unfortunately not. The sensors only work for liquids.

How do I move a sensor?

At page, Documentation, there is a document that gives you advice. But you have to be careful when you remove the sensor from the tank wall. Do not use to much power.

How does it work?

Gobius Pro and Gobius are measuring by a small vibration in the tank wall. It is not ultra sound.

Hi, why has my sensor come loose? // Steve

There are 3 reasons for this.

  1. The temperature of the tank wall was lower than 68 F / 20 C.
  2.  The tank wall was not clean
  3. It was crowded where the sensor was mounted. That is, there is no place to press the sensor firmly.

On the Documentation page, there are several documents that give you tips.

Welcome to our stand 2-212

Read more